MDF Model

As you can see, the MDF cuttings are fairly straight forward. I have an electric saw at home, but it's just as easy to ask places like Focus or B&Q to do this for you. Actually looking back at it now, that's what I should have done as it will save you awkward corners and fittings. Use your hole cutter to ensure 3 holes at the top and bottom of every large bit. This is to promote the airflow through your biltong box.

Try and get as many holes in image 3 as possible without compromising the strength of it. This piece will fit in the middle of your box, just above the light bulb. It is there primarily as a drip tray, but if you wrap it in foil, it could also enhance any heat during the process.

More soon...

Preperation

Hey Guys!

I've been looking for designs for building my own Biltong box for a while now, and it's proving very difficult.

It seems that people just don't want to share their designs, and if they do,the instructions are never detailed enough to make one from scratch!!!

Well I went and did it and I'd like to share my ideas with you. If you have any comments or alternative idea's please use the comment box below.

I'm learning through progress so i won't take it to heart.

Here's what you'll need:

2x sheets 20mm thick MDF or plywood. (at least 1000mmx1200mm, this will give you some off cuts if/when you need them).

8mm Dowelling (1m)

Light fitting with working bulb. (access to a power source is essential)

Hand Held drill with Hole Saw Cutter (approx, 40mm)

Tight knit wire mesh (1mx1m)

Table-top electric saw, with wood attachment blade.

1x Set of Hinges

1x magnetic attachment clip

Some Masking tape, wood glue and wood screws are also helpful.

Most of this stuff you'll find around the house so the cost should be kept low!